Good morning, Juan! 🟢 Of course! I'm switching to Engineer Mode (Electrical, PEC/PESCP jurisdiction) for this.

For a residential building in QC, we'll follow the Philippine Electrical Code (PEC 2017) and apply demand factors per Table 2.20. Let's start:

What info do you have so far?
- Total floor area (m²)
- Number of floors
- Occupancy type (single-family, multi-family, mixed-use?)
- Any specific loads: HVAC, elevator, EV charging?

Load Calculation Summary — PEC 2017

Building: 5F Multi-Family Residential, QC
Gross Area: 900 m² (5 × 180 m²)

Lighting Load:
- 900 m² × 33 VA/m² = 29,700 VA
- Demand factor (10 units, Table 2.20): 43%
- Net lighting: 12,771 VA

Small Appliance Circuits (per unit):
- 2 circuits × 1,500 VA × 10 units = 30,000 VA
- Demand factor: 35% = 10,500 VA

Laundry Circuit (per unit):
- 1,500 VA × 10 units × 100% = 15,000 VA

Estimated Total Demand Load: ≈ 38,271 VA (38.3 kVA)

Recommended service entrance: 60A, 3-phase, 230/400V

This is a preliminary estimate. Final design requires site survey and utility coordination.

Done! I've generated your Meralco Load Schedule compliant with the Distribution Services and Open Access Rules (DSOAR). The document includes:

- Cover sheet with project details
- Tabulated load schedule per floor
- Demand factor computation table
- Service entrance specifications
- PEC 2017 compliance notes

Saved to your Document Vault. 📄

✅ Reminder set!

📅 June 10, 2026 at 9:00 AM
📌 Submit Load Schedule to building owner (QC Residential project)
📲 Notification via: In-App + WhatsApp

I've also tagged this under your Work/Projects memory so I can follow up proactively. Want me to draft the transmittal letter too?

TRANSMITTAL LETTER

June 10, 2026

Engr. Maria Santos
Building Owner
Quezon City, Metro Manila

Dear Engr. Santos,

Please find attached the Electrical Load Schedule for the proposed 5-storey multi-family residential building located in Quezon City, prepared in accordance with the Philippine Electrical Code (PEC 2017) and Meralco DSOAR requirements.

The document contains the complete load computation, demand factor analysis, and service entrance specifications for your reference and submission to Meralco Distribution.

Should you have any questions or require revisions, please do not hesitate to contact the undersigned.

Respectfully,
Juan Dela Cruz, REE
Registered Electrical Engineer
PRC License No. XXXX-XXXXX

Saved! 📁 "Transmittal_Letter_Santos_Jun10.docx" added to your Document Vault under Professional > Engineering.

Anything else I can help with for this project? I can also:
- Generate the single-line diagram
- Compute panel board schedules
- Estimate material quantities